Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2011 >> SX4 2WD L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Continuously Variable Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Secondary Pulley Speed Sensor Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Secondary Pulley Speed Sensor Removal and Installation




Secondary Pulley Speed Sensor Removal and Installation

Removal

1) Disconnect negative cable from battery.
2) Remove air cleaner assembly. Air Cleaner Assembly Removal and Installation
3) Detach wire harness (1) from transaxle.
4) Remove secondary pulley speed sensor (2) from transaxle.
5) Disconnect connector from secondary pulley speed sensor.






Installation

Primary Pulley Speed Sensor and Secondary Pulley Speed Sensor Inspection

Reverse removal procedure noting the following.

- Apply CVT fluid to new O-ring of sensor.
- Tighten secondary pulley speed sensor bolt to specified torque.

Tightening torque
Secondary pulley speed sensor bolt 5.9 Nm (0.60 kgf-m, 4.5 lbf-ft)

- Connect connector and fix wire harness with clamp securely.

pro multis · About Operation CHARM