Air Breather Hose Removal and Installation

Air Breather Hose: Removal and Installation for VQ40DE Engine

Components (2WD Models)





Removal (2WD Models)

1) Release air breather hose from clip.
2) Disconnect air breather hose from transmission tube.
3) Disconnect air breather hose from air breather tube.

Installation (2WD Models)

Installation is in the reverse order of removal.

CAUTION:

- Install air breather hose with paint mark at upper side.
- When installing the air breather hose, do not crush or block by folding or bending the hose.
- When inserting the hose to the transmission tube, be sure to insert it fully until its end reaches the tube bend portion.
- Make sure clip is securely installed to bracket.

Components (4WD)





Removal (4WD Models)

1) Release air breather hose from clip.
2) Disconnect air breather hose from transmission tube.
3) Disconnect air breather hose from air breather tube.

Installation (4WD Models)

Installation is in the reverse order of removal.

CAUTION:

- Install air breather hose with paint mark at upper side.
- When installing the air breather hose, do not crush or block by folding or bending the hose.
- When inserting the hose to the transmission tube, be sure to insert it fully until its end reaches the tube bend portion.
- Make sure clip is securely installed to bracket.