Shift Control

Shift Control: Disassembly and Assembly

Disassembly (A/T Models)

1) Remove the snap ring.






CAUTION:
Do not reuse snap ring.

2) Remove the retaining pin.

CAUTION:
Do not reuse retaining pin.

3) Remove the drum cam from the control shift rod.
4) Remove the retaining pin from the L-H shift rod.






CAUTION:
Do not reuse retaining pin.

5) Remove the 2-4 shift bracket.
6) Remove the retaining ring from the 2-4 shift fork, using suitable tool.






CAUTION:
Do not reuse retaining ring.

7) Remove the fork guide collar and 2-4 shift fork spring from the 2-4 shift fork.

Disassembly (M/T Models)

1) Remove the retaining ring from the 2-4 shift fork, using suitable tool.






CAUTION:
Do not reuse retaining ring.

2) Remove the fork guide collar and 2-4 shift fork spring from the 2-4 shift fork.

Inspection after Disassembly

Shift Fork

- Measure the clearance between the shift fork and sleeve. If it is out of specification, replace it with a new one.





[1][2]Mechanical Specifications [1][2]Mechanical Specifications





Shift Rod and Fork Components

- Check the working face of the shift rod and fork for wear, partial wear, abrasion, bending and other abnormality. If any is found, replace with a new one.






Assembly (A/T Models)

1) Install clevis pin and shift collar to L-H shift fork after assembling them.

CAUTION:
Use caution when installing L-H shift fork, clevis pin or shift collar.

2) Install clevis pin and shift collar to 2-4 shift bracket after assembling them.

CAUTION:
Use caution when installing 2-4 shift bracket.

3) Install the fork guide collar and 2-4 shift fork spring to the 2-4 shift fork, and then secure it with the retaining ring.






CAUTION:
- Do not reuse retaining ring.
- Be careful with orientation.

4) Install the 2-4shift bracket to the L-H shift rod.





5) Install the retaining pin evenly to the L-H shift rod.

CAUTION:
Do not reuse retaining pin.

6) Install the drum cam to the control shift rod, and then secure it with the retaining pin.






CAUTION:
Do not reuse retaining pin.

7) Install the snap ring to the control shift rod.

CAUTION:
Do not reuse snap ring.

Assembly (M/T Models)

1) Install clevis pin and shift collar to L-H shift fork after assembling them.

CAUTION:
Use caution when installing L-H shift fork, clevis pin or shift collar.

2) Install clevis pin and shift collar to 2-4 shift bracket after assembling them.

CAUTION:
Use caution when installing 2-4 shift bracket.

3) Install the fork guide collar and 2-4 shift fork spring to the 2-4 shift fork, and then secure it with the retaining ring.






CAUTION:
- Do not reuse retaining ring.
- Be careful with orientation.