Front Suspension

Front Wheel Hub, Disc, Nut and Bearing Check

- Inspect each wheel disc for dents, distortion and cracks.
A disc in badly damaged condition must be replaced.
- Check rust of installation face inside of wheel disc.
As rust affects adversely, remove it thoroughly.
- Check tightness of wheel nuts and, if necessary, retighten them to specified torque.

Tightening torque
Wheel nut (a): 100 Nm (10.0 kgf-m, 72.5 lbf-ft)





- Check wear of wheel bearing. When measuring thrust play, apply a dial gauge to wheel hub as shown in figure.

Front wheel bearing thrust play
Limit: 0.1 mm (0.004 in.)





- Check wheel bearing noise and smooth wheel rotation by rotating wheel in figure.
If defective, replace bearing.