Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Switch Inspection




Cruise Control Switch Inspection

1) Remove driver air bag (inflator) module referring to Removal and Installation Driver Air Bag (Inflator) Module Removal and Installation:Advanced Air Bag or Removal and Installation Driver Air Bag (Inflator) Module Removal and Installation:Except Advanced Air Bag.
2) Disconnect cruise control switch connector (1) from control coil.
3) Check cruise control switch as follows.

For MAIN (ON/OFF) Switch

Check for continuity between "1" and "8" terminals under each condition below.

If check result is not satisfactory, replace cruise control switch (2).

Cruise MAIN (ON/OFF) switch (3) specification: [B]
Switch button released: Infinity
Switch button pressed: Continuity

For SET/COAST, RES/ACC and CANCEL Switch

Check for resistance between "7" and "9" terminals under each condition below.

If check result is not satisfactory, replace cruise control switch (2).

SET/COAST, RES/ACC and CANCEL switches resistance: [C]
All switches released (OFF): Infinity
CANCEL switch (4) pressed (ON): About 0 ohms
SET/COAST switch (5) pressed (ON): 218 - 222 ohms
RES/ACC switch (6) pressed (ON): 901 -919 ohms