Removal and Replacement

P/S Fluid Change

NOTE:

Using any fluid other than the specified P/S fluid may cause juddering or other faulty conditions.

Be sure to use only the specified P/S fluid.

1) Lift up vehicle.
2) Remove front under cover.
3) When engine is cool, remove P/S gear low pressure hose (1) from pipe and drain P/S fluid from low pressure hose.





4) Install low pressure hose to pipe.
5) Fill specified P/S fluid and bleed air referring to Service and Repair P/S System Air Bleeding Procedure.

P/S fluid specification
: Equivalent of DEXRON�-II

P/S fluid capacity
Reference: 0.7 - 0.8 liters (1.48/1.23 - 1.69/1.41 US/Imp.pt)