Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Grand Vitara 4WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> CMP (Camshaft Position) Sensor Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

CMP (Camshaft Position) Sensor Removal and Installation




CMP (Camshaft Position) Sensor Removal and Installation

CMP (Camshaft Position) Sensor On-Vehicle Inspection

Removal

1) Disconnect negative cable from battery.
2) Disconnect connector from CMP sensor.
3) Remove CMP sensor from cylinder head.

Installation

CMP (Camshaft Position) Sensor Inspection
1) Reverse removal procedure noting the following.
- Apply engine oil to O-ring of CMP sensor (1).
- Tighten CMP sensor bolt to specified torque.

Tightening torque
CMP sensor bolt (a): 11 Nm (1.1 kgf-m, 8.5 lbf-ft)





pro multis · About Operation CHARM