Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Grand Vitara 4WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Level Sensor >> Service and Repair >> Main Fuel Level Sensor Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Main Fuel Level Sensor Removal and Installation




Main Fuel Level Sensor Removal and Installation

WARNING:

Failure to take proper precautions when removing or installing the fuel level sensor can result in fuel leaks and/or damage.

To prevent fuel leaks, be careful not to damage the fuel tube fitting section (sealed section in the bore). If it is damaged, replace the fuel pump.

NOTE:

Failure to take proper precautions when removing or installing the fuel level sensor can result in damage.

To prevent failure of the fuel level sensor, be careful not to touch the resister plate (1) or deforming the arm (2) when performing the service operations described below.





Removal

1) Remove fuel pump assembly from fuel tank. Fuel Pump Assembly Removal and Installation
2) Disconnect main fuel level sensor connector (1).
3) With pressing snap-fit part (2), remove main fuel level sensor (3) from fuel pump (4) by sliding it in arrow direction as shown in figure.





Installation

Fuel Level Sensor Inspection

Reverse removal procedure for installation.

pro multis · About Operation CHARM