Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Grand Vitara 4WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Leak Detector >> Service and Repair >> EVAP Leak Check Module Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EVAP Leak Check Module Removal and Installation




EVAP Leak Check Module Removal and Installation

Removal

1) Remove EVAP canister and EVAP leak check module as an assembly. EVAP Canister Removal and Installation
2) Remove EVAP leak check module (1) from EVAP canister (2).






Installation

For installation, reverse removal procedure noting the following.

- Apply gasoline to O-ring of EVAP leak check module.
- Tighten EVAP leak check module bolts to specified torque.

Tightening torque
EVAP leak check module bolt (a): 5.5 Nm (0.55 kgf-m, 4.0 lbf-ft)





- Install EVAP canister and EVAP leak check module as an assembly. EVAP Canister Removal and Installation

pro multis · About Operation CHARM