Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Grand Vitara 4WD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair >> Knock Sensor Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor Removal and Installation




Knock Sensor Removal and Installation

Removal

1) Disconnect negative cable from battery.
2) Remove intake manifold. Intake Manifold Removal and Installation
3) Disconnect knock sensor connector.
4) Remove knock sensor (1) from cylinder block.

Installation

Knock Sensor Inspection

Reverse removal procedure noting the following.

- Install knock sensor (1) as shown in figure.
- Tighten knock sensor bolt (2) to specified torque.

Tightening torque
Knock sensor bolt (a): 25 Nm (2.5 kgf-m, 18.5 lbf-ft)










pro multis · About Operation CHARM