Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Kizashi AWD L4-2.4L >> Repair and Diagnosis >> Lighting and Horns >> Tail Lamp >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Tail Lamp: Service and Repair




Rear Combination Light Removal and Installation

Removal

1) Remove trunk side trim. Service and Repair
2) Disconnect rear combination light connector.
3) Remove rear combination light nut (1).
4) Remove rear combination light (2) by pushing it in the direction of arrow.





5) Remove bulb.

Installation

Reverse removal procedure noting the following points.

NOTE:

If the gasket (1) is worn or damaged, water may seep into the vehicle body.

Replace the gasket with a new one if it is deformed or damaged.






- Install rear combination light by pushing it in direction of arrow.
- Tighten rear combination light nuts in order of "1", "2" "3" and "4" to specified torque.

Tightening torque
Rear combination light nut (a): 4.5 Nm (0.46 kgf-m, 3.5 lbf-ft)





pro multis · About Operation CHARM