Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Kizashi AWD L4-2.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> CKP Sensor Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

CKP Sensor Inspection




CKP Sensor Inspection

CKP Sensor Removal and Installation
1) Check the following points:
- Check that O-ring (1) is free from damage.
- Check that end face of sensor and signal plate tooth are free from any metal particles and damage.





2) Check CKP sensor as follows.

If faulty condition is found, replace CKP sensor. CKP Sensor Removal and Installation
a) Connect battery (1) and ohmmeter (3) to CKP sensor as shown in figure.
b) Check that CKP sensor resistance varies as specified below by bringing magnetic substance (iron) to CKP sensor.

NOTE:
Be sure to keep approximately 1 mm (0.03 in) gap "a" between magnetic substance (iron) and end face of CKP sensor.

CKP sensor resistance
Resistance varies between less than 220 ohms (ON) and infinity (OFF)





pro multis · About Operation CHARM