Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Kizashi AWD L4-2.4L >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Removal and Replacement >> Generator Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Generator Removal and Installation




Generator Removal and Installation

Removal

1) Disconnect negative (-) cable from battery.
2) Remove engine cover.
3) Remove accessory drive belt. Removal and Installation
4) Disconnect "B" terminal wire (1) and connector (2) from generator (3).
5) Remove generator (3).






Installation

Generator Components

Generator Inspection

Reverse removal procedure, noting the following points

- Tighten generator bolts in numerical order ("1" -> "2" -> "3") evenly and gradually.

Tightening torque
Generator bolt* (a): 45 Nm (4.6 kgf-m, 33.5 lbf-ft)

- Connect wire (1) to generator as shown in figure, and tighten "B" terminal nut to specified torque.

Tightening torque
"B" terminal nut (b): 11 Nm (1.1 kgf-m, 8.5 lbf-ft)









pro multis · About Operation CHARM