Operation CHARM: Car repair manuals for everyone.
Home >> Suzuki >> 2012 >> Kizashi FWD L4-2.4L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Angle Sensor >> Service and Repair >> Rotation Angle Sensor Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rotation Angle Sensor Inspection




Rotation Angle Sensor Inspection

1) Confirm that ignition mode of keyless push start system is in "OFF".
2) Disconnect "P/S control module (rotation angle sensor/torque sensor)" connector (1) from P/S control module.
3) Check continuity between each terminal of "P/S control module (rotation angle sensor/torque sensor)" connector. If check result is not as specified, replace steering gear case.

Rotation angle sensor circuit resistance
Between "3" terminal and "4" terminal 34.6 ohms ± 3.5 ohms (at 20 °C (68 °F))
Between "5" terminal and "6" terminal 34.6 ohms ± 3.5 ohms (at 20 °C (68 °F))
Between "11" terminal and "12" terminal 17.8 ohms ± 1.8 ohms (at 20 °C (68 °F))









pro multis · About Operation CHARM