Air Cleaner Assembly Removal and Installation

Air Cleaner Assembly Removal and Installation

Air Cleaner Components

Removal

1) Disconnect negative (-) cable from battery.
2) Remove engine cover according to the following procedure.
a) Disconnect engine cover hose (1) from air cleaner assembly.
b) Disconnect engine cover front side hook (2) from engine cover pin.
c) Disconnect engine cover rear side hook (3) from engine cover pin.

NOTE:
Failure to be sufficiently careful when removing the engine cover may result in the cover hitting against the cowling front panel and getting damaged.

Remove the engine cover carefully so as not to let it interfere with the surrounding components.





3) Remove air cleaner inlet hose (1).
4) Disconnect MAF and IAT sensor connector (2).
5) Remove air cleaner outlet hose (3).
6) Remove air cleaner assembly (4).





7) Remove air cleaner outlet hose according to the following procedure if necessary.
a) Disconnect breather pipe (1) from air cleaner outlet hose (2).
b) Remove air cleaner outlet hose with resonator (3) from electric throttle body assembly (4).






Installation

Reverse removal procedure for installation.