Fuel Hose Disconnecting and Reconnecting
Fuel Hose Disconnecting and Reconnecting
Connection Other Than Quick Joint
- Clamp around fuel tank
EVAP leak check model
Non-EVAP-leak-check model
Clamp other than around fuel tank
Quick Joint (Other than Fuel Vapor Line)
Disconnecting
1) Remove mud, dust and/or foreign material between pipe (1) and quick joint (2) by blowing compressed air.
2) Unlock joint lock by inserting special tool between pipe and quick joint.
Special Tool
(A): 09919-47020
3) Disconnect quick joint from pipe.
Reconnecting
Insert quick joint to fuel pipe until they lock securely (a click is heard), and confirm that quick joint is not disconnected by hand.
Quick Joint (Fuel Vapor Line)
Disconnecting
1) Remove mud, dust and/or foreign material between pipe (1) and quick joint (fuel vapor line) (2) by blowing compressed air.
2) Disconnect hose joint while joint lock is unlocked by pushing both sides of joint.
Reconnecting
3) Push joint into pipe till joint lock clicks.
4) Then check that quick joint does not pull out by pulling quick joint in arrow direction.