How to Read Connector Codes and Terminal Nos.

How to Read Connector Codes and Terminal Nos.

1) Connector code/Terminal No./Terminal layout
- The connector shape and terminal layout shown in this manual are those when viewed from "Z" in the illustration.
Refer to Connector Views List of Connectors.






NOTE:
Molded terminal numbers that are different from the above can be found on some connectors in rare cases.

These molded numbers are not applied in this manual.

2) Connector type






3) Terminals in one connector (Broken line) (B15)/Terminals in different connectors (B14, B16)





4) Joint connector (J/C)
- The joint connector (J/C) connects several different wires with the same wire color at one place instead of connecting them by welding or caulking one by one. It is not an ordinary connector but a part of the continuous wire in the harness.






5) Weld splice (W/S)

- Several different wires with the same wire color are joined by welding at a W/S.






6) Junction block (J/B)





7) Connector location, shape and terminal No.

Refer to [1][2]Connector Locations Connector Layout Diagram.

Refer to System Circuit Diagram Index System Circuit Diagram.

Refer to Connector Views List of Connectors.