Ignition Switch Removal and Installation

Ignition Switch Removal and Installation

Removal

1) Disconnect negative cable at battery.
2) Confirm that ignition key is removed.
3) Remove dash side trim (4) and steering column hole cover (1).
4) Turn steering wheel to remove steering column cover screws (3) and then remove steering column covers (2).





5) Remove steering column mounting nuts referring to Step 7) under "Removal" of Steering Column Removal and Installation Steering Column Removal and Installation.
6) Disconnect couplers (1) from ignition switch (2).
7) Remove ignition switch (2) from key cylinder (3).






Installation

Ignition Switch Inspection

Reverse removal procedure noting the following.

Tighten steering column mounting nuts referring to Step 2) under "Installation" of Steering Column Removal and Installation Steering Column Removal and Installation.