20000 MI or 32000 KM

Lubricate
    Drive/Propeller Shaft
      Lubricate grease fittings where available. Lubricate slip joints. Tighten flange bolts. Lubricate daily if operated in sand or mud.
Check
    Brakes and Traction Control
      Check fluid level. Inspect pedal freeplay. Inspect lines, hoses, master cylinder, and calipers for wear, leaks and damage. Check rear drum brakes for wear and leaks. Check parking brake. Inspect daily if operated in sand or mud.
    Ball Joint
      Inspect ball joints and boots for looseness or damage.
Tighten/Torque
    Body and Frame
      Check all chassis/body nuts and bolts, torque as necessary.
Inspect
    Steering
      Check linkages for wear and damage. Inspect boots for damage.
    Constant Velocity Joint Boot
      Check boots for leaks and damage.
    Air Filter Element
      Inspect daily if operated in sand, water or mud.
Replace
    Oil Filter, Engine
      Replace every 4 months or 5000 miles.
    Engine Oil
      Replace every 4 months or 5000 miles.
Rotate
    Tires
      Check tires for damage, debris and uneven wear. Adjust pressures as needed.