With Non-Tilt Steering Column

TIGHTENING SPECIFICATIONS
2 Column Assembly Set Bolts And Nuts: 26 Nm (19 ft. lbs.)
5 Column Hole Cover Bolts: 8 Nm (71 inch lbs.)
Column shift:
3 Shift Lever Assembly Bolts: 8 Nm (71 inch lbs.)
3 Turn Signal Bracket Bolts: 2 Nm (17 inch lbs.)
Intermediate No. 2 Shaft X Control Valve Shaft:
Bolt A: 36 Nm (27 ft. lbs.)
Bolt B: 36 Nm (27 ft lbs.)
Sliding Yoke: 36 Nm (27 ft. lbs.)