Front Seat (Separate Type: Power Adjuster)
DISASSEMBLY1. REMOVE HEADREST
2. REMOVE FRONT SEAT CUSHION SHIELD
Remove the screw and front seat cushion shield.
3. REMOVE SLIDE KNOB AND RECLINING KNOB
Using a screwdriver, remove the slide knob and reclining knob.
HINT: Tape the screwdriver tip before use.
4. REMOVE SWITCH BASE
Using a screwdriver, remove the switch base.
HINT: Tape the screwdriver tip before use.
5. REMOVE FRONT SEAT CUSHION COVER
Using a screwdriver, remove the front seat cushion cover.
HINT: Tape the screwdriver tip before use.
6. REMOVE FRONT SEAT CUSHION INNER SHIELD
Remove the screw and front seat cushion inner shield.
7. REMOVE FRONT SEAT INNER BELT
Remove the bolt and front seat inner belt.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
8. REMOVE SEAT CUSHION FRONT SHIELD
Remove the 2 screws and seat cushion front shield.
9. REMOVE SEAT CUSHION LOWER SHIELD
a. Remove the screw.
b. Remove the seat cushion lower shield as shown in the illustration.
c. Employ the same manner described above to the other side.
10. REMOVE POWER SEAT SWITCH
a. Unlatch the front portion of seat cushion cover hook.
b. Turn over the left part of seat cushion cover.
c. Remove the 3 screws.
d. Disconnect the 2 connectors and remove the power seat switch.
11. REMOVE SEAT CUSHION ASSEMBLY
a. Disconnect the connector.
b. Remove the 4 bolts and seat cushion assembly.
Torque: 19 N.m (195 kgf.cm, 14 ft.lbf)
12. REMOVE SEAT CUSHION COVER
a. Unlatch the seat cushion cover hooks, then remove the seat cushion frame from the seat cushion cover with pad.
b. Remove the 12 hog rings and seat cushion cover from the seat cushion pad.
HINT: At the time of reassembly, please refer to the following item. When installing hog rings, take care to prevent wrinkles as much as possible.
13. REMOVE SEATBACK ASSEMBLY
a. Remove the 3 hog rings as shown in the illustration.
HINT: At the time of reassembly, please refer to the following item. When installing hog rings, take care to prevent wrinkles as much as possible.
b. Remove the 4 bolts and seatback assembly.
Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)
14. REMOVE ARMREST
a. Open the fastener.
b. Remove the bolt and armrest.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
c. Remove the armrest cover.
15. REMOVE SEATBACK FRAME
a. Turn over the seatback cover upward.
b. Remove the 2 hog rings as shown in the illustration.
c. Remove the 2 headrest supports.
HINT: At the time of reassembly, please refer to the following item. When installing hog rings, take care to prevent wrinkles as much as possible.
d. Remove the 2 hog rings and seatback cover from the seatback pad with frame.
HINT: At the time of reassembly, please refer to the following item. When installing hog rings, take care to prevent wrinkles as much as possible.
e. Remove the seatback frame from the seatback pad.
16. REMOVE SEAT CUSHION INSIDE COVER
a. Remove the 2 screws and seat cushion inside cover.
b. Employ the same manner described above to the other side.
REASSEMBLY
Reassembly is in the reverse order of disassembly.