Rear Seat
DISASSEMBLY1. REMOVE HEADRESTS
2. REMOVE REAR SEAT LOCK HANDLE
a. Using a screwdriver, remove the rear seat lock handle.
HINT: Tape the screwdriver tip before use.
b. Employ the same manner described above to the other side.
3. REMOVE REAR SEAT LOCK COVER
a. Remove the screw and rear seat lock cover.
b. Employ the same manner described above to the other side.
4. REMOVE REAR SEAT CUSHION COVER
a. Remove the screw and rear seat cushion cover.
b. Employ the same manner described above to the other side.
5. REMOVE SEAT CUSHION ASSEMBLY
a. Remove the 2 bolts.
b. Remove the seat cushion assembly from the seat cushion hinge plate.
c. Employ the same manner described above to the other side.
6. REMOVE LH SEAT CUSHION HINGE COVER
Using a screwdriver, remove the LH seat cushion hinge cover.
HINT: Tape the screwdriver tip before use.
7. REMOVE RH SEAT CUSHION HINGE UPPER AND LOWER COVERS
Using a screwdriver, remove the RH seat cushion hinge upper and lower covers.
HINT: Tape the screwdriver tip before use.
8. REMOVE SEAT CUSHION COVER
a. Open the fastener.
b. Remove the hog rings and seat cushion cover.
c. Employ the same manner described above to the other side.
9. REMOVE SEAT CUSHION SIDE COVER
Remove the screw and seat cushion side cover.
10. REMOVE SEAT CUSHION HINGE PLATE
Remove the 2 nuts and seat cushion hinge plate from the seat-back frame.
11. REMOVE SEATBACK ASSEMBLY
Remove the 4 bolts and seatback assembly.
12. REMOVE CENTER ARMREST
Remove the 2 nuts and center armrest from the seatback assembly.
13. REMOVE CUP HOLDER
Remove the 4 screws and cup holder from the center armrest.
14. REMOVE CENTER ARMREST HINGE
a. Using a screwdriver, remove the center armrest hinge cover.
HINT: Tape the screwdriver tip before use.
b. Employ the same manner described above to the other side.
c. Remove the 2 bolts and center armrest hinge.
15. REMOVE HEADREST SUPPORTS
16. REMOVE SEATBACK COVER
a. Remove the hog rings from the rear side of the seatback assembly.
b. Remove the hog rings and seatback cover.
REASSEMBLY
1. INSTALL SEATBACK COVER
a. Install the seatback cover with new hog rings.
HINT: When installing hog rings, take care to prevent wrinkles as much as possible.
b. Install the new hog rings to the rear side of the seatback assembly.
HINT: When installing hog rings, take care to prevent wrinkles as much as possible.
2. INSTALL HEADREST SUPPORTS
3. INSTALL CENTER ARMREST HINGE
a. Install the center armrest hinge with the 2 bolts.
Torque: 5.0 N.m (51 kgf.cm, 44 in.lbf)
b. Install the center armrest hinge cover as shown in the illustration, then employ the same manner to the other side.
4. INSTALL CUP HOLDER
Install the cup holder with the 4 screws to the center armrest.
5. INSTALL CENTER ARMREST
Install the center armrest with the 2 nuts to the seatback assembly.
Torque: 21 N.m (215 kgf.cm, 16 ft.lbf)
6. INSTALL SEATBACK ASSEMBLY
Install the seatback assembly with the 4 bolts.
Torque: 21 N.m (215 kgf.cm, 16 ft.lbf)
7. INSTALL SEAT CUSHION HINGE PLATE
Install the seat cushion hinge plate with the 2 nuts to the seat-back frame.
Torque: 21 N.m (215 kgf.cm, 16 ft.lbf)
8. INSTALL SEAT CUSHION SIDE COVER
Install the seat cushion side cover with the screw.
9. INSTALL SEAT CUSHION COVER
a. Install the seat cushion cover with new hog rings.
HINT: When installing hog rings, take care to prevent wrinkles as much as possible.
b. Close the fastener.
c. Employ the same manner described above to the other side.
10. INSTALL RH SEAT CUSHION HINGE UPPER AND LOWER COVERS
Install the RH seat cushion hinge upper and lower covers.
11. INSTALL LH SEAT CUSHION HINGE COVER
Install the LH seat cushion hinge cover.
12. INSTALL SEAT CUSHION ASSEMBLY
a. Install the seat cushion assembly to the seat cushion hinge plate.
b. Install the seat cushion assembly to the seatback lock with the 2 bolts.
Torque: 21 N.m (215 kgf.cm, 16 ft.lbf)
c. Employ the same manner described above to the other side.
13. INSTALL REAR SEAT CUSHION COVER
a. Install the rear seat cushion cover with the screw.
b. Employ the same manner described above to the other side.
14. INSTALL REAR SEAT LOCK COVER
a. Install the rear seat lock cover with the screw.
b. Employ the same manner described above to the other side.
15. INSTALL REAR SEAT LOCK HANDLE
a. Install the rear seat lock handle.
b. Employ the same manner described above to the other side.
16. INSTALL HEADRESTS