Front Seat (Separate Type: Power Adjuster)
REMOVAL1. REMOVE SEAT TRACK COVERS
Using a screwdriver, remove the seat track covers.
HINT: Tape the screwdriver tip before use.
2. REMOVE FRONT SEAT
a. Remove the 4 bolts.
b. Disconnect the connectors.
c. Remove the front seat.
NOTE: Be careful not to damage the body.
INSTALLATION
1. INSTALL FRONT SEAT
a. Mount the front seat to the vehicle.
NOTE: Be careful not to damage the body.
b. Connect the connectors.
c. Slide the front seat to the rearmost position.
d. Tighten the bolts on the front side temporarily, starting from the bolt on the inner side tighten them completely.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
e. Slide the front seat to the most front position.
f. Tighten the bolts on the rear side temporarily, starting from the bolt on the inner side tighten them completely.
Torque: 37 N.m (375 kgf.cm, 27 ft.lbf)
2. INSTALL SEAT TRACK COVERS