Deceleration Sensor Check

4WD: DECELERATION SENSOR CHECK

a. Connect 3 dry batteries of 1.5 V in series.





b. Connect VGS terminal to the batteries' positive (+) terminal, and GGND terminal to the batteries' negative (-) terminal, apply about 4.5 V between VGS and GGND terminals.

NOTE: Do not apply voltage of 6 V or more to terminals VGS and GGND.





c. Check the output voltage of GL1 terminal.

HINT:
- If the sensor is tilted too much it may show the wrong value.
- If dropped, the sensor should be replaced with a new one.
- The sensor removed from the vehicle should not be placed upside down.