Brakes - Front Brake Caliper Identification

BRAKES
BR001-03
REVISED

January 8, 2003

Title:
FRONT BRAKE COMPONENT IDENTIFICATION

Models:
'00 - '05 Tundra, '01 - '05 Sequoia

TSB UPDATE NOTICE:

The information contained in this TSB supercedes TSB No. BR003-00. TSB No. BR003-00 is now obsolete and should be discarded.

TSB REVISION NOTICE:

March 25, 2005: Parts Information - Part titles and part numbers have been updated and "Note" added.

The previous TSB should be discarded.

Introduction

There are two caliper designs that are in use for Tundra and Sequoia vehicles. The brake pads and fitting kits for these two calipers are not interchangeable. The pictures and parts lists below are intended to assist you in identifying and ordering the correct replacement pads and fitting kits.

Applicable Vehicles:
^ 2000 - 2005 model year Tundra vehicles.
^ 2001 - 2005 model year Sequoia vehicles.





Warranty Information





Parts Information

NOTE:
Refer to TSB No. BR004-02, "Front Brake Vibration," when installing new design caliper assembly.