Fuel Delivery and Air Induction: Testing and Inspection
FUEL CUT RPMINSPECTION
1. WARM UP ENGINE
Allow the engine to warm up to normal operating temperature.
2. CONNECT TOYOTA HAND-HELD TESTER OR OBD II SCAN TOOL
a. Connect a TOYOTA hand-held tester or OBD II scan tool to the DLC3.
b. Please refer to the TOYOTA hand-held tester or OBD II scan tool operator's manual for further details.
3. INSPECT FUEL CUT OFF RPM OPERATION
a. Increase the engine speed to at least 2,500 rpm.
b. Check for injector operating noise.
c. Check that when the throttle lever is released, injector operation noise stops momentarily and then resumes.
HINT:
- The vehicle should be stopped.
- Measure with the A/C OFF.
Fuel return speed: 1,000 rpm
4. DISCONNECT TOYOTA HAND-HELD TESTER OR OBD II SCAN TOOL