Transmission Adaptor

DISASSEMBLY








1. REMOVE RETAINER
Remove the 4 bolts, retainer and gasket.





2. 5VZ-FE:
REMOVE SELECT RETURN SPRING
3. REMOVE OIL RECEIVER
a. Using snap ring pliers, remove the snap ring.
b. Remove the oil receiver.





4. REMOVE OIL SEAL
Using a screwdriver, remove the oil seal.





5. REMOVE BEARING
Using SST and a hammer, remove the bearing.
SST 09950-60010 (09951-00580), 09950-70010 (09951-07100)

REASSEMBLY





1. INSTALL BEARING
Using SST and a hammer, install a new bearing.
SST 09950-60010 (09951-00650), 09950-70010 (09951-07100)





2. INSTALL OIL SEAL
Using SST and a hammer, install a new oil seal.
SST 09950-60010 (09951-00580), 09950-70010 (09951-07100)
Oil seal in depth: 2.0 ± 0.2 mm (0.078 ± 0.008 inch)
3. INSTALL OIL RECEIVER
a. Install the oil receiver.
b. Using snap ring pliers, install the snap ring.





4. 5VZ-FE:
INSTALL SELECT RETURN SPRING








5. INSTALL RETAINER
Install a new gasket and the retainer with the 4 bolts.
Torque: 19 Nm (195 kgf-cm, 14 ft. lbs.)