Rear Differential

Part 1 Of 2:

Part 2 Of 2:

REMOVAL
1. DRAIN HYPOID GEAR OIL
2. REMOVE REAR AXLE SHAFTS
3. DISCONNECT REAR PROPELLER SHAFT





4. REMOVE DIFFERENTIAL CARRIER ASSEMBLY
a. Remove the 10 nuts, washers and differential carrier assembly.

NOTICE: Be careful not to damage the installation surface.

b. Remove the gasket.

INSTALLATION
1. INSTALL DIFFERENTIAL CARRIER ASSEMBLY
a. Install a new gasket.
b. Install the differential carrier assembly with 10 washers and nuts.

NOTICE: Be careful not to damage the installation surface.

Torque: 73 Nm (740 kgf-cm, 54 ft. lbs.)
2. CONNECT REAR PROPELLER SHAFT
3. INSTALL REAR AXLE SHAFTS
4. FILL DIFFERENTIAL WITH HYPOID GEAR OIL