Disassembly

ENGINE HOOD / DOOR: BACK DOOR: DISASSEMBLY

1. PRECAUTION

NOTICE:
For the glass hatch type, if any of the following parts are removed and installed or adjusted, the location of the axis of the rear wiper motor assembly will change, causing the wiping angle to change. Be sure to remove and install the rear wiper motor assembly using the centering jig.





2. REMOVE BACK WINDOW UPPER TRIM PANEL ASSEMBLY

(a) Disengage the 4 clips and 4 claws, and remove the back window upper trim panel assembly.





3. REMOVE BACK DOOR TRIM COVER LH (w/o Power Back Door)

(a) Disengage the 2 clips and 2 claws, and remove the back door trim cover LH.





4. REMOVE BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)

(a) Disengage the 6 claws, and remove the back door service hole cover LH.





5. DISCONNECT POWER BACK DOOR ROD (w/ Power Back Door)

(a) Disconnect the power back door rod and remove the back door stay plate.





6. REMOVE BACK DOOR TRIM COVER LH (w/ Power Back Door)

(a) Disengage the 2 clips and 2 claws, and remove the back door trim cover LH.





7. REMOVE BACK DOOR TRIM COVER RH

(a) Disengage the 2 clips and 2 claws, and remove the back door trim cover RH.





8. REMOVE BACK DOOR LOCK COVER (for Glass Hatch Type)

(a) Disengage the 2 claws and 4 guides, and remove the back door lock cover.





9. REMOVE ASSIST STRAP HOLE COVER

(a) Disengage the 2 claws and 2 guides, and remove the assist strap hole cover.





10. REMOVE ASSIST STRAP ASSEMBLY

(a) Remove the bolt and assist strap assembly.





11. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

(a) Disengage the 16 clips and remove the back door trim panel assembly.





12. REMOVE BACK DOOR LOCK COVER (for Fixed Glass Type)

(a) Disengage the 2 claws and 4 guides, and remove the back door lock cover.





13. REMOVE BACK PANEL TRIM BRACKET SUB-ASSEMBLY

(a) Disengage the 2 clips and remove the back panel trim bracket sub-assembly.





14. REMOVE BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)

(a) Disconnect the connector.





(b) Remove the 3 bolts and back door lock assembly.

15. REMOVE BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)

(a) Disconnect the connector.





(b) Disengage the clamp.

(c) Remove the 4 bolts and back door lock assembly.





16. REMOVE STEREO COMPONENT SPEAKER ASSEMBLY (w/ Back Door Speaker) Removal

17. REMOVE POWER BACK DOOR WARNING BUZZER (w/ Power Back Door) Removal

18. REMOVE POWER BACK DOOR MAIN SWITCH (w/ Power Back Door) Removal

19. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door) Removal

20. REMOVE POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

HINT
Use the same procedure for the RH side and the LH side.

21. REMOVE BACK DOOR OUTSIDE GARNISH ASSEMBLY

22. REMOVE TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System) Removal

23. REMOVE REAR WIPER SHAFT COVER (for Glass Hatch Type) Removal

24. REMOVE REAR WIPER ARM HEAD CAP Removal

25. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY Removal

26. REMOVE REAR WIPER MOTOR GROMMET (for Fixed Glass Type) Removal

27. REMOVE REAR WIPER LINK CAP (for Glass Hatch Type) Removal

28. REMOVE REAR WIPER LINK PIVOT (for Glass Hatch Type) Removal

29. REMOVE REAR WIPER MOTOR ASSEMBLY (for Glass Hatch Type) Removal

30. REMOVE REAR WIPER MOTOR ASSEMBLY (for Fixed Glass Type) Removal

31. REMOVE BACK WINDOW LOCK ASSEMBLY (for Glass Hatch Type) Removal

32. REMOVE BACK DOOR GLASS GUIDE BRACKET SUB-ASSEMBLY (for Fixed Glass Type)

(a) Loosen the bolt [A].





NOTICE:
Bolt [A] cannot be removed from the back door glass guide bracket sub-assembly.

(b) Remove the 3 bolts [B].

(c) Disengage the clip and remove the back door glass guide bracket sub-assembly.





33. REMOVE REAR SPOILER SUB-ASSEMBLY Removal

34. REMOVE BACK WINDOW STAY ASSEMBLY LH (for Glass Hatch Type) Removal

35. REMOVE BACK WINDOW STAY ASSEMBLY RH (for Glass Hatch Type)

HINT
Use the same procedure for the RH side and the LH side.

36. REMOVE BACK DOOR GLASS Removal

37. REMOVE NO. 2 BACK DOOR WEATHERSTRIP

(a) Remove the No. 2 back door weatherstrip.