Vehicles Involved
VIN Range ProductionModel Year VDS Number Date
Camry 1983 SV12E
(2S-E) & SV16E 0000001 - January '83
1984 SV12H 0226484 through
SV16H July '84
Cargo
Van 1984 YR27V 0000001 - August '83
(3Y-E) 0011303 through
July '84
Van 1984 YR22V 5000001 -
(3Y-E) YR26V 5039256
Inspection/Replacement Procedures
Please refer to the attached technical instructions for details of the inspection/replacement procedures.
Parts Ordering
As with previous campaigns, the necessary parts must be ordered from your facing Parts Distribution Center. The parts required for this campaign include:
Part Name Part Number Quantity
Igniter Sub-Assembly 89620-14210-68 1
* Note: Check that the replacement igniter is marked with a short black mark.
In order to eliminate over-ordering or excessive parts inventory, it is recommended that the initial parts order does not exceed 15% of the number of vehicles on the owner list for your dealership. If you are a new dealership or a recent buy/sell, you may not receive a VIN list. In this case, it is recommended that parts are ordered based on owner response.
Completion Label
Following installation of the center arm, a SSC completion label will be affixed to the left front door post near the door hinge on the Van and on the firewall for the Camry. Additional SSC completion labels may be ordered through the non-parts system on a 1450 order form or through the TDN system.
Part Name (Non-Parts) Part Number Quantity
Campaign Completion 00410-01917 # of Sheets
Labels (50 Labels/
Sheet)