Disassembly/Assembly

Fig. 10 Combination Switch Exploded View:

HEADLIGHT, DIMMER & TURN SIGNAL SWITCH

1. Remove combination switch as outlined previously.
2. Remove set plate, Fig. 10.
3. Remove light dimmer turn switch attaching screws.
4. Slide switch from switch body with spring, then remove roller.
5. Reverse procedure to install

WINDSHIELD WIPER/WASHER SWITCH

1. Remove combination switch as outlined previously.
2. Remove switch to switch body attaching screws, Fig. 10.
3. Remove wiper/washer switch.
4. Reverse procedure to install.