Alignment

FRONT END ALIGNMENT
-95
Caster Angle, Degrees Limits +2 1/2 to +4
Desired +3 1/4
Camber Angle, Degrees Limits -1 3/4 to-1/4
Desired -1
Toe-In, Inch [01] -.04 to +.12
Toe-Out On Turns, Degrees Outer Wheel 32
Inner Wheel 37
Steering Axis Inclination, Degrees 13 5/6
Ball Joint Wear [02]



REAR ALIGNMENT -95
Camber Angle, Degrees Limits -2 1/3 to - 5/6
Desired -1 7/12
Toe-In, Inch [01] +.08 to +.24


[01] -- Toe-in (+), toe-out (-).
[02] -- Refer to Ball Joint Inspection under Front Suspension & Steering section.