Air Bag Control Module: Service Precautions

1. Never reuse the center airbag sensor assembly involved in a collision when the airbag has deployed.
2. The connectors to the center airbag sensor assembly should be connected or disconnected with the sensor mounted on the floor. If the connectors are connected or disconnected while the center airbag sensor assembly is not mounted to the floor, it could cause undesired ignition of the supplemental restraint system.
3. Work must be started after 90 seconds from the time the ignition switch is turned to "LOCK" position and the negative (-) terminal cable is disconnected from the battery even just loosing the set bolts of center airbag sensor assembly.