Ignition Switch: Service and Repair

1. On models with coded audio anti-theft systems, refer to Technician Safety Information for code procedures. On models with air bag system, disarm airbag system as outlined under Technician Safety Information.

2. Remove upper and lower steering column covers.
3. Place ignition switch in OFF position, then disconnect ignition switch connector.
4. Remove four retaining screws and ignition switch. If necessary, remove lower steering column.
5. Reverse procedure to install. Reset audio anti-theft system, if necessary, as outlined Technician Safety Information. On models with air bag system, rearm airbag system as outlined under Technician Safety Information.