Alignment

FRONT END ALIGNMENT

1/2 TON MODELS
Caster Angle, Degrees
Limits [03]
Desired [04]
Camber Angle, Degrees
Limits -1/3 to +1 1/6
Desired + 5/12
Toe, Inch [01] +.04 to +.20
Toe-Out On Turns, Deg.
Inner Wheel 40 2/3
Outer Wheel 35 1/6
Steering Axis Inclination, Deg. 12 1/12
Ball Joint Wear [02]


1 TON MODELS
Caster Angle, Degrees
Limits + 5/6 to +2 1/3
Desired +1 7/12
Camber Angle, Degrees
Limits -1/3 to +1 1/6
Desired + 5/12
Toe, Inch [01] +.20 to +.36
Toe-Out On Turns, Deg.
Inner Wheel 40 5/12
Outer Wheel 35 7/12
Steering Axis Inclination, D 12 1/6
Ball Joint Wear [02]

[01] -- Toe-in (+); toe-out (-)
[02] -- Refer to Ball Joint Inspection in Front Suspension & Steering.
[03] -- Standard suspension, +1 7/12 to +3 1/12
[03] -- soft ride suspension, +1 11/12 to +3 5/12.
[04] -- Standard suspension, +2 1/3; soft ride suspension, +2 2/3.