Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 1995 >> Tacoma 2WD L4-2.4L (2RZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Testing and Inspection

NOTICE: "Cold" and "Hot" in the following sentences express the temperature of the sensor itself. Cold is from -10°C (14°F) to 50°C (104°F) and Hot Is from 50°C (104°F) to 100°C (212°F).

1. REMOVE CRANKSHAFT POSITION SENSOR.
2. INSPECT CRANKSHAFT POSITION SENSOR RESISTANCE.





- Using an ohmmeter, measure the resistance between terminals.

- Resistance:
Cold NE (+) and NE (-): 1,630 - 2,740 Ohms.
Hot NE (+) and NE (-): 2,065 - 3,225 Ohms.

- If the resistance is not as specified, replace the crankshaft position sensor.
3. REINSTALL CRANKSHAFT POSITION SENSOR.
pro multis · About Operation CHARM