Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 1996 >> Camry Wagon V6-3.0L (1MZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Service and Repair

PARK/NEUTRAL POSITION SWITCH REPLACEMENT



1. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

2. REMOVE PARK/NEUTRAL POSITION SWITCH
- Remove the clip from the shift control cable.



- Remove the nut and control cable.



- Remove the transaxle control shaft lever.
- Remove the park/neutral position switch.

3. INSTALL AND ADJUST PARK/NEUTRAL POSITION SWITCH



- Install the park/neutral position switch.



- Adjust the park/neutral position switch.



- Install the transaxle control shaft lever.



- Install the control cable and nut.

Torque: 15 Nm (150 kgf.cm, 11 ft.lb)

- Install the clip to the shift control cable.

4. CONNECT PARK / NEUTRAL POSITION SWITCH CONNECTOR
5. TEST DRIVE VEHICLE

pro multis · About Operation CHARM