Fluid Pump, A/T

SERVICE SPECIFICATIONS
Body Clearance
Standard 0.07 - 0.015 mm (0.0028 - 0.0059 inch)
Maximum 0.3 mm (0.012 inch)
Tip Clearance:
Standard 0.11 - 0.140 mm (0.0043 - 0.0055 inch)
Maximum 0.3 mm (0.012 inch)
Side Clearance:
Standard 0.02 - 0.05 mm (0.0008 - 0.0020 inch)
Maximum 0.1 mm (0.004 inch)
Pump Body Bushing Inside Diameter:
Maximum 38.18 mm (1.5031 inch)
Stator Shaft Bushing Inside Diameter:
Front Side Maximum 21.57 mm (0.8492 inch)
Rear Side Maximum 27.07 mm (1.0657 inch)

TORQUE SPECIFICATIONS
Oil Pump Body X Stator Shaft 10 Nm (100 kgf-cm, 7 ft. lbs.)
Oil Pump X Transaxle Case 25 Nm (250 kgf-cm, 18 ft. lbs.)