Tightening Specifications
Cylinder Head Bolt Tightening Sequence
Cylinder Head Bolts:
Torque:
1st Pass 34 Nm (25 ft. lbs.)
2nd Pass + 90°
3rd Pass + 90°
Recessed Head Bolts:
Torque 18 Nm (13 ft. lbs.)
Camshaft Bearing Cap Bolts:
Torque 16 Nm (12 ft. lbs.)
Camshaft Bearing Cap Bolt Tightening Sequence:
Intake RH
Exhaust RH
Intake LH
Exhaust LH
Intake Manifold Bolts:
Torque 18 N-m (180 kgf-cm, 13 ft-lbf)
Exhaust Manifold Nuts:
Torque 40 N-m (400 kgf-cm, 30 ft-lbf)
Camshaft Pulley Bolt:
Torque 110 N-m (1,100 kgf-cm, 81 ft-lbf)