Alignment

GENERAL SPECIFICATIONS
Front Wheel Alignment
Camber:
Nominal -0.25°
Range -1.0° to +1.0°
Left-Right Error 0.5° or less.

Caster:
Nominal +3.08°
Range +2.33° to +3.83°
Left-Right Error 0.5°

Steering Axis Inclination:
Nominal 11.0°
Range 10.25° to 11.75°
Left-Right Error 0.5°

Toe-In:
A+B:
Nominal 0.2°
Range 0.0° to 0.4°
C+D:
Nominal 0.08 inch
Range 0.0 inch to 0.16 inch

Wheel Angle:
Inside Wheel:
Nominal 35°
Range 33° to 36°
Outside Wheel:
Reference 31°

Vehicle Height [1]:
A-B 69.6 mm (2.740 inch)
C-D 49.6 mm (1.953 inch)

[1] Measuring points are as follows:
A Ground clearance of spindle center
B Ground clearance of front adjusting cam bolt center
C Ground clearance of rear axle shaft center
D Ground clearance of lower control arm front bushing center