Alternator

Generator:

GENERATOR BELT REMOVAL
1. REMOVE BATTERY AND BATTERY TRAY
2. DISCONNECT POWER STEERING (PS) RESERVOIR TANK





3. REMOVE DRIVE BELTS
a. Loosen the lock bolt, pivot bolt and adjusting bolt.
b. Remove the 2 drive belts.

GENERATOR BELT INSTALLATION





1. INSTALL DRIVE BELTS
a. Install the drive belts.
b. Adjust the drive belt with the adjusting bolt.
c. Tighten the pivot and adjusting lock bolts.

Torque:
Pivot bolt: 59 N.m (600 kgf.cm, 43 ft.lbf)
Lock bolt: 21 N.m (210 kgf.cm, 15 ft.lbf)

2. CONNECT POWER STEERING (PS) RESERVOIR TANK
3. INSTALL BATTERY TRAY AND BATTERY