Ignition Coil: Testing and Inspection
Ignition Coil
NOTICE: "Cold" and "Hot" in the following sentences express the temperature of the coils themselves. "Cold" is from -10°C (14°F) to 50°C (122°F) and "Hot" is from 50°C (122°F) to 100°C (212°F).
1. DISCONNECT IGNITION COIL CONNECTOR AND HIGH-TENSION CORD FROM IGNITION COIL
2. INSPECT PRIMARY COIL RESISTANCE
Using an ohmmeter, measure the resistance between the positive (+) and negative (-) terminals.
Primary coil resistance:
If the resistance is not as specified, replace the ignition coil.
3. INSPECT SECONDARY COIL RESISTANCE
Using an ohmmeter, measure the resistance between the positive (+) and high-tension terminals.
Secondary coil resistance:
If the resistance is not as specified, replace the ignition coil.
4. RECONNECT HIGH-TENSION CORD AND IGNITION COIL CONNECTOR TO IGNITION COIL