Knock Sensor: Testing and Inspection

INSPECTION

1. REMOVE KNOCK SENSOR 1
(a) Disconnect the knock sensor connector.





(b) Using SST, remove the knock sensor. SST 09816-30010





2. INSPECT KNOCK SENSOR 1
Using an ohmmeter, check that there is no continuity between the terminal and body.
If there is continuity, replace the sensor.

3. REINSTALL KNOCK SENSOR 1
(a) Using SST, instal the knock sensor. SST 09816-30010

Torque: 44 N.m (450 kgf.cm, 33 ft.lbf)

(b) Connect the knock sensor connector.