Camshaft, Engine

SERVICE SPECIFICATIONS
Camshaft Maximum Circle Runout:
At Center Journal 0.04 mm (0.0016 inch)
Camshaft Journal Oil Clearance:
Standard 0.025 - 0.062 mm (0.0010 - 0.0024 inch)
Maximum 0.10 mm (0.0039 inch)
Camshaft Lobe Height:
Standard:
Intake 42.01 - 42.11 mm (1.6539 - 1.6579 inch)
Exhaust 40.06 - 40.16 mm (1.5772 - 1.5811 inch)
Minimum:
Intake 41.90 mm (1.6496 inch)
Exhaust 39.95 mm (1.5728 inch)
Camshaft Journal Diameter 26.959 - 26.975 mm (1.0614 - 1.0620 inch)
Camshaft Gear Spring:
Free Distance 22.5 - 22.9 mm (0.886 - 0.902 inch)
Camshaft Thrust Clearance:
Standard:
Intake 0.045 - 0.100 mm (0.0018 - 0.0039 inch)
Exhaust 0.030 - 0.085 mm (0.0012 - 0.0033 inch)
Maximum:
Intake 0.12 mm (0.0047 inch)
Exhaust 0.10 mm (0.0039 inch)

TORQUE SPECIFICATIONS
Camshaft To Camshaft Timing Pulley:
With Special Service Tool (SST) 37 Nm (27 ft. lbs.)
Less SST 54 Nm (40 ft. lbs.)