Steering Column: Specifications

SERVICE SPECIFICATIONS
Steering Column:
Pawl Stopper:
1 Or A 12.68-12.74 mm (0.4992-0.5016 inch)
2 Or B 12.61-12.67 mm (0.4965-0.4988 inch)
3 Or C 12.54-12.60 mm (0.4937-0.4961 inch)
4 Or D 12.47-12.53 mm (0.4909-0.4933 inch)
5 Or E 12.40-12.46 mm (0.4882-0.4906 inch)
6 Or F 12.33-12.39 mm (0.4854-0.4878 inch)
7 Or G 12.26-12.32 mm (0.4827-0.4850 inch)

TORQUE SPECIFICATIONS
Steering Column Assembly:
Set Nut 25 Nm (19 ft. lbs.)
Set Bolt 14 Nm (11 ft. lbs.)
Control Valve Shaft To:
Intermediate No.2 Shaft 35 Nm (26 ft. lbs.)
Intermediate Shaft To:
Intermediate No.2 Shaft 35 Nm (26 ft. lbs.)
Intermediate Shaft To:
Main Shaft 35 Nm (36 ft. lbs.)
Compression Spring Torx Bolt 7.8 Nm (69 inch lbs.)
Turn Signal Bracket Set Bolt 5.4 Nm (47 inch lbs.)
Tilt Lever Retainer Set Nut 15 Nm (11 ft. lbs.)
Tilt Pawl Set Bolt To Nut 5.9 Nm (52 inch lbs.)
Tilt Lever Assembly Set Bolt 2.9 Nm (26 inch lbs.)
Column Protector Set Bolt 2.9 Nm (26 inch lbs.)