Front
REMOVAL
1. Remove both stabilizer links.
a. Remove the 2 nuts and stabilizer bar link.
HINT: If the ball joint turns together with the nut, use a 5 mm hexagon wrench to hold the stud.
Torque: 44 Nm (33 ft. lbs.)
b. Employ the same manner described above to the other side.
2. Remove brackets and bushings.
a. Remove the four bolts, two brackets and two bushings.
Torque: 19 Nm (14 ft. lbs.).
b. Remove the stabilizer bar from the left hand side.
INSTALLATION
Installation is in the reverse order of removal.