Wheels and Tires: Testing and Inspection

TIRE AND WHEEL INSPECTION
1. Inspect tire.
a. Check the tires for wear and for the proper inflation pressure.
Cold tire inflation pressure: P205/55R15 87V
- Front and Rear: 230 kPa (33 psi).





b. Check the tire runout.
Tire Runout: 1.0 mm (0.039 inch) or less.





2. Rotating tires.

HINT: See the illustration for where to rotate each tire.





3. Inspect the wheel balance.
a. Check and adjust the off-the-car balance.
b. If necessary, check and adjust the on-the-car balance.
Unbalance after adjustment: 8.0 g (0.018 lbs.) or less.





4. Check wheel bearing looseness.
a. Check the backlash in the bearing shaft direction.
Maximum: 0.08 mm (0.0031 inch).
b. Check the axle hub deviation.
Maximum: 0.07 mm (0.0028 inch).
5. Check the front suspension for looseness.
6. Check the steering linkage for looseness.
7. Check the ball joint for looseness.
8. Check the shock absorber works properly.
- Check for oil leaks.
- Check mounting bushings for wear.
- Bounce front and rear of the vehicle.