Differential: Specifications

SERVICE SPECIFICATIONS
Drive Pinion Preload (At Starting)
New Bearing 1.0 - 1.6 Nm (10 - 16 kgf.cm, 8.7 - 13.9 inch lbs.)
Reused Bearing 0.5 - 0.8 Nm (5 - 8 kgf.cm, 4.3 - 6.9 inch lbs.)
Total Preload (At Starting) - Add Drive Pinion Preload
New Bearing 0.3 - 0.4 Nm (2.9 - 4.0 kgf.cm, 2.5 - 3.5 inch lbs.)
Reused Bearing 0.1 - 0.2 Nm (1.5 - 2.0 kgf.cm, 1.3 - 1.7 inch lbs.)
Pinion to side gear backlash 0.05 - 0.20 mm (0.0020 - 0.0079 inch)
Side Gear Thrust Washer Thickness
0.95 mm (0.0374 inch)
1.00 mm (0.0394 inch)
1.05 mm (0.0413 inch)
1.10 mm (0.0433 inch)
1.20 mm (0.0427 inch)
Side Bearing Adjusting Shim Thickness
1.90 mm (0.0748 inch)
1.95 mm (0.0768 inch)
2.00 mm (0.0787 inch)
2.05 mm (0.0807 inch)
2.10 mm (0.0827 inch)
2.15 mm (0.0846 inch)
2.20 mm (0.0866 inch)
2.25 mm (0.0886 inch)
2.30 mm (0.0906 inch)
2.35 mm (0.0925 inch)
2.40 mm (0.0945 inch)
2.45 mm (0.0965 inch)
2.50 mm (0.0984 inch)
2.55 mm (0.1004 inch)
2.60 mm (0.1024 inch)
2.65 mm (0.1043 inch)
2.70 mm (0.1063 inch)
2.75 mm (0.1083 inch)
2.80 mm (0.1103 inch)

TORQUE SPECIFICATIONS
Ring Gear x Differential Case 97 Nm (985 kgf.cm, 71 ft. lbs.)
Counter Drive Gear X Drive Pinion 172 Nm (1,750 kgf.cm, 127 ft. lbs.)