Front Wiper and Washer

With the ignition SW turned ON, current flows to TERMINAL 17 of the front wiper and washer SW, TERMINAL 2 of the washer motor and TERMINAL 6 of the front wiper motor through the WIPER fuse.
1. LOW SPEED POSITION
With the wiper SW turned to LOW position, current flows from TERMINAL 17 of the front wiper and washer SW to TERMINAL 7 to TERMINAL 3 of the front wiper motor to wiper motor to TERMINAL 1 to GROUND, causing the wiper motor to run at low speed.

2. HIGH SPEED POSITION
With the wiper SW turned to HIGH position, current flows from TERMINAL 17 of the front wiper and washer SW to TERMINAL 8 to TERMINAL 2 of the front wiper motor to wiper motor to TERMINAL 1 to GROUND, causing the wiper motor to run at high speed.

3. INT POSITION
With the wiper SW turned to INT position, the relay operates and the current which is connected by relay function flows from TERMINAL 17 of the front wiper and washer SW to TERMINAL 2 to GROUND. This operates the intermittent circuit and current flows from TERMINAL 17 of the front wiper and washer SW to TERMINAL 7 to TERMINAL 3 of the front wiper motor to wiper motor to TERMINAL 1 to GROUND, and operating the wiper.
The intermittent operation is controlled by a condenser's charged and discharged function installed in the relay, and the intermittent time is controlled by a time control SW to change the charging time of the condenser.

4. MIST POSITION
With the wiper SW turned to MIST position, current flows from TERMINAL 17 of the front wiper and washer SW to front wiper mist SW to TERMINAL 2 to GROUND, and current flows from TERMINAL 17 to TERMINAL 7 to TERMINAL 3 of the front wiper motor to wiper motor to TERMINAL 1 to GROUND, causing the wiper motor to run at low speed.

5. WASHER CONTINUITY OPERATION
With the washer SW pushed to ON, current flows from TERMINAL 2 of the washer motor to TERMINAL 1 to TERMINAL 11 of the front wiper and washer SW to TERMINAL 2 to GROUND, causing the washer motor to run, and the window washer emits a water spray. This causes current to flow to washer continuity operation circuit in TERMINAL 17 of the front wiper and washer SW to TERMINAL 7 to TERMINAL 3 of the front wiper motor to wiper motor to TERMINAL 1 to GROUND, operating the wiper.