Keyless Entry - Remote Control Programming: Overview
ACCESSORIESAX007-99
Title:
KEYLESS ENTRY REMOTE CONTROL
PROGRAMMING
Models:
All Models
May 14, 1999
Introduction
This bulletin describes the procedures that are used to program the two-button remote control for vehicles that are equipped with dealer (DIO) or port installed option (PIO)., not the Factory Remote keyless Entry System. For Factory Keyless Entry System Remote Control Programming, refer to the appropriate vehicle repair manual.
Verification of the DIO or PIO Toyota Keyless Entry System can easily be performed by identifying the remote transmitter.
^ The remote transmitter has two buttons, Top and Bottom.
The DIO or PIO Keyless Entry System utilizes only remote controls with black cases.
The same remote controls but with gray cases, used for 1998 MY and later RS3000.
TVIP systems, will not work with this keyless entry system.
NOTE:
The DIO or PIO Keyless Entry System is programmed to operate with the two remote controls that come with the vehicle. The ECU (computer) can be programmed to operate with up to four different remote controls. For customer satisfaction, request that all existing remotes be furnished when programming a new or replacement unit.
Affected Vehicles
^ All models with DIO or PIO equipped Toyota Keyless Entry System
Warranty Information